Interior Wall Putty
|FOB Price:||US $5 / Piece|
|Min. Order:||100 Pieces|
|Min. Order||FOB Price|
|100 Pieces||US $5/ Piece|
|Production Capacity:||1000 Barrel/Barrels Per Day|
|Transport Package:||in 25 Kgs/Barrel.|
|Payment Terms:||L/C, T/T|
- Trademark: Baier
- Origin: Linyi, China
- Specification: BE-1
It is used for joint application, including walls, ceilings, arches and external beads.
Mixed Jointing Compound
Mixed Interior Wall Putty
Weight:25 kg /Bucket
1) Containing no toxic substances, healthy
2) Environmental friendly.
3) Easily available and efficient to apply it on the wall directory.
4) No wastage of water curing
5) User friendly and enables the mason/worker to get the desired results
6) Free from shrinking and cracking
7) Ensures full strength on setting
8) Shows excellent adhesive qualities with the surface
9) The appearance is very attractive- light, flat and smooth surface, and a good back base for painting
10) Has a good impact strength
How to use
1)This product is suitable for all the coats for hand and machine application. Slightly stir Before use and directly apply to plasterboards or interior wall.
2)the interior wall or plasterboard surface must be clean, smooth and firm, dry and without dust or oil.
3)After it dry fully, then it can be painted
4)Cover tight the lid of barrel or close the bags after use
5)Tools: Interior wall putty is applied using a trowel, and daub the putty to the interior wall in average state
1. The packing: In 25 kgs/barrel.
2. Life time: 8 months.
3.The whiteness degree:90% .
4.dry time :3 hours
5.Use quantity:1 m2 drywall or ceiling area for 1 kg putty.
Priming before applying paint on walls and ceilings
The Interior Wall Putty is a ready to use filler paste, packed in JS-X bucket,weighs 25kg/bucket,stated in paste. It's mixed with water and special jointing compound.
The Interior Wall Putty is appropriate for:
Priming before applying paint on walls and ceilings.
Filling in the joints of gypsum boards along with a joint tape.
Repairing cracks occuring on concrete surfaces.
Renovation works, as well as general repairing works.
The surface on which the Interior Wall Putty is applied should be stable, clean, dry and free of dust.
How to use:
The Interior Wall Putty can be used directly as it is in the bucket. It should not be mixed with other materials. It should not be applied in temperatures under +5°C.Consumption is approximately 0.8-1.1kg for one square meters of wall. To obtain better results, apply two or three putty layer over the surface of wall.
Avoid the putty being stiff. Before long periods of not being in use,the edges of the bucket should be cleaned and safely capped.After the end of the work, all tools and buckets should be cleaned with water.
A larger amount of Interior Wall Putty could be needed in concrete surfaces.
Flexible External and Internal Wall Putty
High strength, excellent water, alkali and freeze-thaw resistance
Flexible External and Internal Wall Putty
High strength, excellent water, alkali and freeze-thaw resistance. High adhesion to surface of various walls and exterior coatings.
It has good waterproof property, high crack resistance because imported hydrophobic polymer is incorporated in the formulation.
The disadvantage of using traditional primer. such as random selection of materials and mixing ratio, low strength and poor water, alkali resistance, can be overcome. Moreover, workload and labor are saved, application is easier.
2.Strong bonding force
3.Strong anti-cracking and waterproof
It has good two-way compatibility, strong cohesive force with base plane and paint primer.
It is ready-mix product, has uniform and stable performance, can be used by opening and adding water and latex, convenient and environmental.
It has good thixotropy, even and smooth, smooth construction, could improve the construction efficiency.
It has excellent crack resistance and water resistance. Eliminate the cracking, sand buckle and peeling phenomenon which caused by traditional 107 glue + white cement.
The leveling facing is exquisite, smooth; reduce the amount of painting and the comprehensive cost.
It is non-toxic and harmless, no radiation, no irritating smell. It does not contain flammable erosion substances, convenient and safe. The good weather resistance ensures the shelf.
Use the Renovation of exterior wall leveling putty, there is base plane without output, this reduce the cost and improve the construction efficiency.
Scope of application
It is suitable for leveling of special rough inorganic plane outside the building, including mortar plaster, concrete, standard block, and brick and so on.
Matching paint: water, oil paint, stone paint, and inorganic coatings
Treatment of base plane
The base plane should be smooth and strong; no dust, grease, release agents, batik materials and so on.
If the base place is very uneven, leveling it with powder putty for exterior wall for one time. The new plastered cement mortar surface should be maintained for more than 14 days before construction.
If the weather is hot and dry or the porosity of base plane is high, construction should be done after water the base level and waiting until no clear water.
Stir with motor stirrer until even, standing for 5-10 minutes, and stir again will get better result.
|Product name||YY-612 general||YY-622 general double component)||YY-625 strength double component||YY-626 srenew double component||YY-628 elastic waterproof|
|Mix the powder and water in the proportion||Powder:water=25:(5.5-6.5)||Powder:additives:water=25:2.5:(5-6)||Powder:additives:water=25:5:(2.5-3)|
|Construction tools||Container, motor stirrer, putty knife, spray and coating tool and grinding tool, etc.|
|Construction time interval(hr)||>4|
The construction should be done from 5 °C to 40 °C.
Control strictly about putty proportion of water and powder, avoid appear product too loose, too low strength because of too much water; or product dry fast and too low strength because of too much powder.
If adding too much water when stirring, should add more powders.
The mortar should be used within 4 hours.
Keep in dry and cold place, unopened powder is valid for 1 year, additives is valid for 6 months.
|Surface drying time(Hr)||≤5|
|Cohesive strength||standard state (Mpa)||≥0.6|
|Freeze-thaw cycle (Mpa)||≥0.4|
|Alkali resistance (48hr)||No change|
|Water resistance (96hr)||No change|
|Using level (kg/ m²)||1-1.5|